Author |
Message |
Phelan
| Posted on Thursday, September 03, 2009 - 12:52 pm: |
|
|
Goldtooth
| Posted on Thursday, September 03, 2009 - 12:56 pm: |
|
sure is a clean bearing for a worn out muffler! |
Phelan
| Posted on Thursday, September 03, 2009 - 01:01 pm: |
|
It was properly maintained! Lol |
Jramsey
| Posted on Thursday, September 03, 2009 - 01:08 pm: |
|
Fartler 440 muffler bearings have a lifetime warranty. |
Kyrocket
| Posted on Thursday, September 03, 2009 - 02:05 pm: |
|
Fartler 440 muffler bearings Reminds me I need to make some 239 bean soup. Any more and it would be too farty (240) |
Phelan
| Posted on Thursday, September 03, 2009 - 02:26 pm: |
|
Whew! I almost forgot to lube up the headlights too! |
Puddlepirate
| Posted on Thursday, September 03, 2009 - 04:55 pm: |
|
You don't have to lube the headlights as long as your blinker fluid level is good. |
Phelan
| Posted on Thursday, September 03, 2009 - 05:02 pm: |
|
Oh, okay. Good. I was getting worried there! |
Buellistic
| Posted on Thursday, September 03, 2009 - 05:20 pm: |
|
Hope you checked the RAPER STAT BUSHING ... Of course the KINENBLER PIN is rather hard to get at ... |
Buellish
| Posted on Thursday, September 03, 2009 - 06:16 pm: |
|
Don't forget the Inverted Steam Frapper Valve and Radiator Colletts. Oh sorry,this should be on the 1125 forum. |
Kyrocket
| Posted on Thursday, September 03, 2009 - 06:38 pm: |
|
You know if your 710 cap is not secured the oil pressure will push it out. |
Buellistic
| Posted on Thursday, September 03, 2009 - 07:02 pm: |
|
Who was that BLOND ??? |
Fast1075
| Posted on Thursday, September 03, 2009 - 07:10 pm: |
|
No, my friends...the battery chains are most important...tight, or all the "juice" will leak out . Nice muffler bearing!!! used synthetic lube on that?? |
Kyrocket
| Posted on Thursday, September 03, 2009 - 07:50 pm: |
|
Wait a minute...profile says he's a waiter/server, where'd you get the surgery spec equipment? Just kidding, my aunt used to sell hospital surgery equipment. I have tons of it in the garage, makes excellent fishing tools to have in the tackle box, and some of those scissors will cut through bone and all stainless to boot. |
Phelan
| Posted on Thursday, September 03, 2009 - 07:53 pm: |
|
Okay, I'll be honest- that's not me. I found that pic online and almost wet my pants laughing. |
Ebutch
| Posted on Thursday, September 03, 2009 - 09:35 pm: |
|
I think that muffler bearing looks Fine!!!
|