| Author | Message | ||
     Ebutch |
On S2 or S3 probably S3 is easer?It,s a pain using S2 and S3 Gauges in different positions.Butch  | ||
| Phelan |
I think the wires might be a little tight along the edge but maybe not so bad if you swap them on an S2...  (Message edited by Phelan on August 06, 2009) | ||
| Easy_rider |
I looked at a couple dashes I have available. The S2 and carbed S3 dash has the same configuration. The FI S3 dashes are different. I'm guessing that the older dashes have the speedo on the left to accommodate the drive cable? It looked like there was enough play in the S3 FI dash to swap the gauges. Don't shoot me if I' wrong! | ||
| Phelan |
Here's a better picture:  (Message edited by Phelan on August 06, 2009) | ||
| Sparky |
FWIW, S3 & S3T have speedo & tach positions reversed. The only difference is the length of the speedo cable, the S3 having the longer one. | ||
| Ebutch |
Yes,Thanks,will swop S3 gauges positions.  |
