G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tod662 Posted on Saturday, August 01, 2009 - 08:01 pm:        there is yellow marker on one side of my gaskets does it go up or down?   Kyrocket Posted on Saturday, August 01, 2009 - 08:08 pm:        If it doesn't specify in your directions I think the rule is the mark goes up. Anyone else? I am basing this on past experience and what I have read and most recently my piston rings stated that the mark on the rings went up. If there was no mark what-so-ever it didn't matter.   Tod662 Posted on Saturday, August 01, 2009 - 08:11 pm:        thanks also anybody got tips on removing the old gasket from the cylinder, a razor blade is digging in more then i like   Dpg Posted on Saturday, August 01, 2009 - 08:29 pm:        I sprayed aerosol gasket remover on the base gasket I recently removed. It softens the surface of the gasket a bit, but not enough to do a one step removal. Wear rubber gloves and just keep at it. No easy chore. Safe ride, Gary in Oaktown

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: