G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Phelan Posted on Sunday, June 28, 2009 - 09:52 pm:        The bolt spacing on the tube frame Buell front calipers is the same as the '84-'99 Harleys. I wonder if this means that the 6-piston Thunderheart caliper I picked up for my dad's FXD will fit on my S2? I didn't have time to take the old caliper off and try, but I did measure the holes spacing and it is the same... (Message edited by Phelan on June 29, 2009)   Texastechx1 Posted on Sunday, June 28, 2009 - 10:36 pm:        diameter of rotor and alignment of rotor and caliper would be the next things to measure... there only one way to find out.   Pkforbes87 Posted on Sunday, June 28, 2009 - 11:21 pm:        would be nice to find a caliper that is a bolt-on fit with the brembo rotor. (10mm smaller diameter than stock) Yeah I know - custom caliper mount. But a bolt on caliper would be so much easier, and IMO would make the install look a lot cleaner with fewer necessary parts.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: