| Author | Message | ||
     Tsm81xtreme |
I have a 01' X1 and it has a PC III on it. I want to go back to stock, it looks like the guy who had the bike before put a 4 wire 02 sensor on it and just spliced everything together. My question is how do I go back to stock. Like how do my fuel injectors hook up stock and everything basically related to unhooking the PCIII. Basically I want to uninstall the PC, how do I do it. Any and all help GREATLY appreciated. Thanks, Matt Tully | ||
| Andymnelson |
It only hooks up in a couple of places- at the ECM, a ground wire, at the O2 sensor, and at the injectors. -Unhook ground -Unplug from ECM -Unplug form injectors and from the harness at the injectors -Unplug at the O2 sensor -Get a new O2 sensor (as stated before, you need a Bosch 12014 (made for a 93 Chevy pickup) for like $20 from any auto parts store -Plug the factory harness back into the injectors -find the 1-wire O2 sensor wire and reconnect it. Should be under the battery tray. -Reset TPS and AFV using ECMSpy. -Ride. |
