G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ferrisbuellr Posted on Monday, June 15, 2009 - 09:20 pm:        HEEEHAAWWW!!! I forgot to put a cotter pin back in one of the front caliper's brake pad support pins on my 96 S1. ( popped out on the highway... never to be seen again) Dealer says they don't even have a part # for it.... Anybody?   Guell Posted on Monday, June 15, 2009 - 09:32 pm:        My local ace hardware carries them in different lengths. Give them a shot   Bluzm2 Posted on Monday, June 15, 2009 - 10:47 pm:        Find another dealer. I've ordered on in the past, maybe a year ago.. My S2 parts manual doesn't show the part number either. I may have gotten the part directly from PM, I don't remember for sure. I just remembered wher I ordered it, Appleton HD! When Andy still worked there. (Message edited by bluzm2 on June 15, 2009)   Court Posted on Tuesday, June 16, 2009 - 06:07 am:        Any dealer should be able to get it easily. IF not, let me know . . . I have a box of them buried somewhere I **think**   Ratbuell Posted on Tuesday, June 16, 2009 - 10:50 am:        Dealer parts lookup does *not* show a part number for caliper parts, you have to go thru PM directly.   80rs427 Posted on Tuesday, June 16, 2009 - 01:16 pm:        I got a couple of these pins for my '96 S1 from Appleton back when Andy was there. Part number H0112.8, cost $1.35 list. I know I ruined one, but I might have a spare in my box of stuff. If you still need one, let me know and I'll do some digging.   Loki Posted on Tuesday, June 16, 2009 - 02:37 pm:        I think I went the simple way when mine were worn out. Replaced them with a couple stainless steel bolts/nuts. Add some safety wire and good to go. I only need to cut the wire on the bolts to pull the pads. Pull the bolts out, leaving the nuts tied together.   Ferrisbuellr Posted on Wednesday, June 17, 2009 - 06:55 pm:        thanks (all) for the info...(once again) you guys have been extremely helpful....I'll try the various channels you've mentioned...and if I strike out, I'll be back to pester you....   Phelan Posted on Thursday, June 18, 2009 - 12:04 am:        I took the remaining one with me to the hardware store, found a bolt with a smooth area the size of the pin before its threads, cut the threads off with a grinder and drilled a hole for the retaining pin. Works fine for me...   Al_lighton Posted on Thursday, June 18, 2009 - 09:57 am:        I think I have a few in stock, but I'm at home at the moment and can't tell from here. I know they aren't on the website. Call, 760-727-2333 Al

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: