G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Revz Posted on Tuesday, May 26, 2009 - 09:12 am:        Been trying to so some searches about the difficulty, hints, and wisdom about how to replace fork seals. I know the info is here somewhere, just need an arrow to follow I guess... I have 49,700m on a 97, S3 and the front seals are ever so slightly weeping, so any directions to where this might have been discussed here? Thanks for the help... Larry   Bandm Posted on Tuesday, May 26, 2009 - 11:02 am:        http://www.badweatherbikers.com/buell/Manuals/S1_1 996-1997_Service/BU2b.pdf   Bad_karma Posted on Tuesday, May 26, 2009 - 10:34 pm:        Consider getting springs and some valving when you go into the tubes. You can take a good suspension and make it much better. Joe   Revz Posted on Wednesday, May 27, 2009 - 09:03 pm:        After doing some further searches I found the one about cleaning with thin piece of plastic. The weeping has stopped... That said I will look at replacing seals in off season...Thanks for all the advice. Larry

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: