G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Old School Buell » Archive through May 17, 2009 » Alignment of S3 Lower Fairing « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Dragonwing
Posted on Friday, May 15, 2009 - 01:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

How best to describe this without sounding too much like an idiot? I installed a set of lowers on Pazuzu last summer, and then had to take her to the dealer for some engine work. The tech removed and re-installed the lower on the left hand side (the longer one) and now the alignment seems a bit off. My question is this: At the top leading edge of this fairing piece is a radiused point that matches the bottom leading edge of the tank. How do the two of these line up together? I had them, originally, lined up so that the points met at a smooth curve. After the reinstall, the tech had the fairing moved forward about an inch so that this point is now ahead of the tank. When I went to move it back to what I thought was the correct position, I noticed that it seemed that the fairing then took an odd bend to it, as the tank was now pressing on the fairing and torquing it downward. Does anyone have a photo of the alignment of the top of the fairing with the tank, or can someone describe for me how these two are supposed to be aligned? I must admit that when the two points are even, it looks much better, but I don't want to have to deal with cracking problems that I'd cause...

DW
Top of pagePrevious messageNext messageBottom of page Link to this message

Jramsey
Posted on Friday, May 15, 2009 - 01:42 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'd say the tech loosened the split-clamp lower mount and now its miss aligned.

I would position the lower and adjust the split-clamp to fit.

Cracking in the upper rearward radius seems to be common,I made a brace out of small strap that mounts to the split-clamp to eliminate the fairing flutter.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration