G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Shag9499 Posted on Wednesday, April 08, 2009 - 06:42 pm:        hey guys i have the race kit on my 01 m2. question is where can i get the plastic inner spacer (possibly called venturi) it mounts on the inside of the back plate and the bolts go through it. its been overtightened by po and the wholes are wollered out lol.   Sleez Posted on Wednesday, April 08, 2009 - 07:31 pm:        al sells the tall one here; http://www.americansportbike.com/shoponline/ccp0-p rodshow/5637.html don't know if it makes more power or not???   Shag9499 Posted on Wednesday, April 08, 2009 - 07:43 pm:        thanks sleez i looked there but not in the right places. now im off to find what the torque spec is for the exhaust header studs as when i took one off the stud came out and what kind of loctite.   Buellistic Posted on Wednesday, April 08, 2009 - 08:43 pm:        Shag9499: Max. TORQUE 6 ft. lbs. with anti-size compound on the threads ... Use GASKET,exhaust port PN 17048-98 which come two in a package ... Put ex.header nuts on finger tight(equal number of threads), then torque from rear to front 2 ft. lbs., then do 4 ft. lbs., and then finish with 6 ft. lbs. ... MAY THE LONG LASTING BUELL BE WITH YOU !!!}

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: