| Author | Message | ||
     Phelan |
Hello fellow BadWebber! I am needing stuff for my Buell, but I'm low on cash, like many of you, so I thought I'd post some of the stuff I have to offer for bartering and some of the stuff I want. Let me know if you are interested. What I have to offer: -Early style Force exhaust (needs repair) -Forcewinder intake -Stock S2 header (surface scratches on lower tuber and small dent but works perfect) -Carbon fiber S2 V&H muffler -S2 tank cover (black sapphire w/ scratches) -S1W carbon fiber hugger -S2 stock carbon fiber hugger -billet handgrips for 1" handlebars (black anodized w/ crosses engraved) -One-off 54mm clipons for 1" bars, come w/ split drag bars (designed and cut by Shane Sorenson @ Chainsikle Performance) -stock S2 rockerboxes (fit '91-03 XL, '91-'02 Buell) -blown 16.5" shock from an M2 (no resevoir) -who knows what else; I'll check the closet Some stuff I'd like: -Buell race header, S1W header, or clean S2 header -carbon fiber hamcam (gray style with XL bolt pattern) -16.5" blown shock w/ resevoir (so I can send of to RaceTech) -Corbin seat for S2 -stock Ducati 848/1098 front axle -high output horn -XBR headlights -who knows; tell me what ya got in mind. LMK Ross Edit- more stuff that I have available for barter: -NRHS billet points cover -Billet top tree -2003 100th anniversary Sportster gas tank (Message edited by Phelan on April 02, 2009) (Message edited by phelan on April 03, 2009) | ||
| Lovedabueller |
what will you take for the force exhaust. | ||
| Gowindward |
What would you take for the CF hugger? Do you have the lower belt guard too? | ||
| Phelan |
Dunno, what ya got? With the welding it needs (which is an easy but ugly fix), I'd value it at about $125, so whatever you got that I might want that'd be in that range. I like Carbon fiber and billet, like anyone else  . some other stuff I'd be interested in: -CF derby cover -CF points cover -billet arm that covers the sprocket (I already have a CF sprocket cover on the stock arm) -CF shock cover -S2 fairing lowers -NRHS billet pushrod bases -Mikuni carb -XB turn signals -etc. Like I said, what'ya got? | ||
| Jmkybf |
Also interested in the force exhaust. Not trying to step on any toes. I have a 16.5" with resevoir that is not blown. That plus cash? | ||
| Phelan |
I don't have a lower belt guard (yet). I may have one from a purchase but it'll be for my use. Make an offer for it, but I can't get rid of it until I find out for sure if I'm getting another one or cutting down the S1W hugger; I'm waiting to hear back from a BadWebber to know for sure. TO ALL: You can PM me with offers if you'd like, but let's try to keep this at Bartering, because I'm not posting this in the classifieds, and I don't want to get I'm trouble for being in the wrong section. AFAIK we don't have a section for bartering anywhere... | ||
| Lovedabueller |
can i see pics. you can send em to my pm address. thanks | ||
| Trouble_enabler |
Hey Ross, I would be interested in the clip-ons, can you email a pic to mdove315@gmail.com? Thanks, Mike | ||
| Phelan |
LDB, I don't have your email address; send me a PM and I'll have it. If you already have, I haven't got it yet. Lmkybf, I am very interested in your proposal, but LDB has dibs for now. I'll let you know if it becomes available again. | ||
| Phelan |
Trouble, Send me a PM with your email and I'll try to send you pics in a minute. FYI they are drag style clipons, so they are very low. I originally had them built for my XL1200S that had an S2 frontend on it. Edit- sorry, didn't see your email address in the post the first time LOL. (Message edited by phelan on April 02, 2009) | ||
| Phelan |
I added, to my list of stuff available above, a Billet top tree and NRHS billet timing cover. Mike passed on the clipons, so they are still available. | ||
| 80rs427 |
I'm interested in the CF S1W hugger and the forcewinder intake. I've got unused CF hamcan and points cover. PM sent.... | ||
| Guell |
Ross, can you send me some pics of the billet top tree! Thanks | ||
| Phelan |
John, Matt, Kieth, and Wilson, emails sent from my hotmail account. | ||
| Firemanjim |
I have a shock with res --want one without for Bville bike. | ||
| Phelan |
Sending PM Jim, but I already have two shock offers prior. | ||
| Phelan |
Some more things I'd be interested in: -Stenzel bar -Buell Hydration Pack -Buell knee pucks -Buell shirts sz M -Buell leathers -XB caliper -Spark plug wires -Brembo rear brake pads -right side S2 mirror -Pirelli tires Just use your imagination. Offer anything that you think I could use. With the economy the way it is, nobody has a lot of money to throw around, so why waste it. BadWeb is a large enough community that we could make a huge success out of a swap zone. My goal with this thread is to hopefully help everyone I do business with, as well as myself, to come out better than we were before. A half used can of Mother's alum polish, a working horn from a junked Cadillac, a couple spare sheets of vinyl covered Carbon Fiber with adhesive backing, a spare tie-bar, whatever. (Message edited by Phelan on April 03, 2009) | ||
| F_skinner |
Posted for Phelan:  | ||
| Eshardball |
I have a Carbon Fiber ham can on my S2. Is your Forcewinder for FI applications? Watcha think? Eric | ||
| Blake |
This belongs in the classifieds section, yes? | ||
| Phelan |
Blake, I didn't post this in the classifieds because I didn't think it fit there as well as here. All the classified section reads as parts for sale, which my parts aren't. I'm looking to barter with people to get our bikes fixed, not make any monetary gain. But this was just my interpretation of the rules. If I am wrong, I'll move my bartering to the classifieds. LMK. Lmkybf, LDB backed out on the Force exhaust. I'll send you a PM. To all: I don't need any more shock offers. I have one offer pending, and one as a backup that I know will work, so I don't need anymore. Thanks to everyone contributing to my barter thread here. Eric, I already have an offer pending for a CF hamcam, and an offer for the Forcewinder. I'll keep you updated though. | ||
| Beatx1 |
I have a pair of NOS xbr headlights that I pickup off ebay a few years ago. IM me and we can deal. | ||
| Malott442 |
oooh i see lots | ||
| Phelan |
Matt, LMK what you're interested in. Loren, the S2 hugger is officially on the market; I picked up a 3rd different CF hugger that I'll be using. Let me know what your ideas for trade are. Steve, I sent you a PM. FMJ, as soon as I get the shock swapped I'll send you mine. John, I'll send you pics as soon as I can of the S1W hugger and FW. TO ALL: the force exhaust, stock header, V&H muffler, and blown M2 shock are officially off the market. There are other parts that will probably be off the market soon, but those are the officials. I have some other stuff worth noting that is available: -X1/S1 carbon fiber front fender -Cometic Head Gaskets -Shumacher trickle charger -Buell Tuber front axle w/ nut and spacers -2 spare sets of rockerarms and shafts -Force aluminum breather bolts -70186-82 Ground cable NIP What I still need: -Brake pads for Brembo rear caliper -junk front tire (just needs to hold air for project) -XB rotor -right side mirror for S2 -stebel horn or Cadillac horn -Buell Knee Pucks -Buell Hydration Pack -stenzel bar LMK what you think. Ross (Message edited by Phelan on April 03, 2009) | ||
| Malott442 |
All right, guess I chimed in very late........ Clip ons Force Huggers (all) I have a pile of stuff sitting around still.Could I see pics of the parts? I understand all of the parts are prob gone, but if they fall through keep me in mind. Appreciate it... | ||
| Phelan |
No prob Matt. The Force exhaust is gone. The 3rd hugged I picked up is for my personal use, but the S1W hugger and the S2 hugger are still available. The clipons are available, but they are for 1" handlebars. Not sure how much use that would be for you. LMK. | ||
| F_skinner |
I have a two up S2 corbin seat. It has some tears in it although I used it like this for a year. I would recommend getting it recovered. I do not feel right selling it but will trade. I need: rear and front rotor for PM wheels any S2 body work The front spider assembly for s2 42 mm carb     | ||
| Gowindward |
Frank, "front spider assy" Is that that the faring mount? I have a fairing mount. Would you swap for the seat? I can recover it myself. | ||
| Phelan |
Loren, this is my thread! LOL jk. Frank, I am interested in the seat as well. I'll send you an email. Loren, are you still interested in the hugger? If so, which one? LMK. Ross | ||
| F_skinner |
Sorry Ross, Loren was first. Actually I am surprised you were not faster on your iphone. Yes Loren, that is what I need. PM me your address again and I will get it out to you next week. Frank |
