| Author | Message | ||
     Tclason |
i have a 99 x1 that i had the heads ported and polished and then i also have a custom two into one intake, D&D slip on pipe as well. will a race ecm be enough for these mods? if i am thinking about this rite it should because? i am just helped it flow better....rite the valves are still stock size and still have stock cams so the same amount or a lil more air is coming into the cylinder head but not enough that a race ecm should'nt be able to compensate. if i were to have bigger valves or a big bore kit installed i would understand the need for more fuel. what is ur opinion on the matter? any help is greatly aprecciated! | ||
| Oldog |
Tim, only a dyno tune can tell you the exact requirements, head work, cams and other work all work in concert with each other to provide better air flow & hence more power you can try the race ecm it will likley run and checking the plugs will tell if there are issues, the intake intregues me pix please? | ||
| Brinnutz |
Yes I agree, a 2 into 1 intake? | ||
| Tclason |
I use to work for S&S Cycle and i custom made a 2into1 intake for a big twin to fit on my X1. i liked the way they looked and i am very happy with the end results. problam though!....the picture i have is too big...do u know how to post a pic on here? if so i would send it to u and if u can get it to post on here i would apreciate it!....just give me and e-mail to send to and ill get a pic to ya asap...thanks guys.... | ||
| Yo_barry |
are you sure you don't mean 1 into 2 ? | ||
| Tclason |
No i mean 2 into one! Two air filters into 1 intake/Carb | ||
| Tclason |
anyone help with loading pictures of this?...i will e-mail them to u. it says they are to big and i dont know how to get them to the rite size... | ||
| Tdman77 |
Send me the pics and I will size them down for you. tdman77@yahoo.com | ||
| Tclason |
thanks alot...i just sent it to ya | ||
| Brinnutz |
Tclason, send them to me as well, I'll get them up in a couple minutes. | ||
| Tdman77 |
Back at you. It should work. Since you are/were an S&S guy check out the S&S intake on my X1. Yes my knee does hit it, but not all the time. (I'm only 5'9) I wish I could do something like what you did. Sweet! | ||
| Tclason |
here we go.......  | ||
| Brinnutz |
Ahh yes, I remember something similar made by...crap, who was it...where's you're muffler??? Good lookin bike! | ||
| Limitedx1 |
it looks like the one off piece that rauso.de made, that looks awesome!!!! | ||
| V74 |
i want one,how do i get it!!!!!!!!! | ||
| Tclason |
well contact S&S and i think they make them for sportsters and then u are gonna have to clearance the mounting bracket...quit a bit! im a machinist so it was no problame. i donno i kinda like being the only one out there with this set up...Damn..shouldnt have said anything.but yes very nice piece....around 250 or 300 dolloar...not sure. u would have to check with S&S Cycle....or i could find out for ya. | ||
| Limitedx1 |
Its a bit more than 300 im sure of it! i checked when they first came out.... |
