Author |
Message |
X1_rider
| Posted on Wednesday, March 18, 2009 - 07:38 am: |
|
My X1W "destruction" is coming along good for powdercoating. I was reading the service manual and for taking apart/rebuilding the front forks, they say you have to use a special spring compressor tool. Is it really necessary, if yes, is there a place I can purchase one. Thanks for any information. Here is a pic of my poor baby in pieces.
|
Lovedabueller
| Posted on Wednesday, March 18, 2009 - 08:44 am: |
|
it works well if you have two people, one to hold the spring down, and the other to take it apart, the nut assembly at the top that is. |
Oldog
| Posted on Wednesday, March 18, 2009 - 09:23 am: |
|
If you dont have killer springs you can lever the retainer down and slip the keeper down. I do it with my hands |
X1_rider
| Posted on Wednesday, March 18, 2009 - 10:27 am: |
|
Thanks for the information guys. A month ago I reloaded my StreetGlide forks with a lowering kit spring on my own, I can probably do it without the tool on the Buell. Thanks again. |
Billetmetallic
| Posted on Wednesday, March 18, 2009 - 10:52 am: |
|
dont forget to put oil back in the motor! |
|