G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Ztferrari Posted on Monday, March 09, 2009 - 05:28 pm:        I think I need to adjust my pushrods. Super loud clanking/ticking at idle. Anyone have any tips/tricks to doing this? My old s2 didnt have adjustable p.rods. Thanks! -Scott   Firemanjim Posted on Tuesday, March 10, 2009 - 01:07 am:        So what do you have different? Just so you know all the aftermarket stuff is much noisier than stock--cams, pushrods, etc. My 1250 S-2 with Redshift cams, Jims lifters and rockers, adj pushrods was so noisy compared to stock it was scary.   Ztferrari Posted on Tuesday, March 10, 2009 - 12:40 pm:        The bikes got edelbrock heads, crane cams (unsure of specs), and crane adjustable pushrods. I did a pushrod adjustment according to literature last night and it didn't get any better. I never minded the noise in the first place, sounds really mechanical.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: