G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Adsva83 Posted on Wednesday, March 04, 2009 - 10:39 am:        I recently sold my '02 M2, but it only took me a month to find a tuber to replace it in the garage. I pick the bike up this weekend and I'm going to give everything a once over to see if there is anything that stands out as needing replaced. I do know that I'm going to have to replace the back tire before I ride it very far. From reading the other posts should i just go ahead and replace the wheel bearing there while I have the wheel off?   Oldog Posted on Wednesday, March 04, 2009 - 01:11 pm:        should i just go ahead and replace the wheel bearing there while I have the wheel off? Only of they are bad Heat juducuously applied to the hub side helps the process. ( NOTE I HAVE PM WHEELS ) Nice looking millenium .. (Message edited by oldog on March 04, 2009)   Adsva83 Posted on Wednesday, March 04, 2009 - 01:38 pm:        The bike i just sold had the PM wheels, I should have held onto it long enough to swap them out.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: