G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Old School Buell » Archive through February 14, 2009 » 99 buell lightning x1!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Stripedape
Posted on Sunday, February 08, 2009 - 08:47 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

is it possible that a tps would function as the book says it should and still be bad?runs fine unplugged.........yeh its been reset and have checked voltage while twisting throtle and its within range 0.5-1.5 volts closed throttle and 3.9-4.9 volts wide open and no voltage spikes in between.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Sunday, February 08, 2009 - 09:19 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What sort of trouble are you having?
Top of pagePrevious messageNext messageBottom of page Link to this message

Stripedape
Posted on Sunday, February 08, 2009 - 09:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

it is running rough and popping through the injection i unplug the tps and it runs normal until i twist the throttle about half way...................thanks in advance
Top of pagePrevious messageNext messageBottom of page Link to this message

Kalali
Posted on Monday, February 09, 2009 - 12:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

What do you mean by "popping through the injection"? And so what happens when you turn the throttle half way??
And finally, are you checking the voltages via ECMSPY or regular voltmeter? The main difference is the knowledge of knowing whether or not the ECM is working properly.
Top of pagePrevious messageNext messageBottom of page Link to this message

Oldog
Posted on Monday, February 09, 2009 - 02:46 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

have checked voltage while twisting throtle and its within range 0.5-1.5 volts closed throttle and 3.9-4.9 volts wide open and no voltage spikes in between.

I presume that is the spy readings,

Ok Tps appears ok

what else has been changed?

I take Popping through the injecton to mean spitting back out of the intake

lean mixture ( filter off ) skewed sensor etc

please post the following

If you can at idle,
air temp indication
the actual air temp
head temp

tps position in %, deg and volts
idle speed

STOP MOTOR what are the % deg and volts at FULL THROTTLE ( on the stop )


what condition is the fuel and filter
what condition is the vent

check the cable adjust and stop adjust

}
Top of pagePrevious messageNext messageBottom of page Link to this message

Jstfrfun
Posted on Monday, February 09, 2009 - 02:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Dog, this is the same guy with the timing tread, he didn't "run in" the new settings on a new ECM. When I did mine Al told me I had to ride the bike for 15-20 miles @ 30-35 mph to "run in" the new ECM. And he's using ECMSpy without a dyno.
Top of pagePrevious messageNext messageBottom of page Link to this message

Oldog
Posted on Wednesday, February 11, 2009 - 11:19 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Fun I reset the TPS on my race ecm and took it out and rode it too. it was wonky at first too. I wonder if SA just reset the AFV and the TPS or if he went mucking about.

whats wierd is the unplug the tps and it runs ok to 1/2 throttle,

need to prove that the TPS is functioning and reasonabley close to correct.

then other tests to see what may be amiss

my 02 zero it and like you suggest ride it for a while then re-check it.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jstfrfun
Posted on Wednesday, February 11, 2009 - 04:27 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

+1 on that, and if it still is wonkey, GET HELP!

If the thing ran ok till you started mucking with it then you need to have someone un-muck it up who knows Spyware, they're proper values and can diagnose the issues.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration