G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Old School Buell » Archive through November 27, 2008 » XB9 heads on a S1 « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Skntpig
Posted on Thursday, November 13, 2008 - 11:11 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I have a chance to buy XB heads for under $300.

Only one has the top with the rockers and covers but two heads.

Will my S1 rockers work on these? I guess these don't have the carb mount holes or side breathers. Can these be drilled and who does this/cost?

This would be a good time to go to XB tops but I like the looks of the stockers better and mine pukes very little.

How do these work with the lightning flat tops and an otherwise stock motor?
Top of pagePrevious messageNext messageBottom of page Link to this message

Phelan
Posted on Thursday, November 13, 2008 - 11:20 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I'm jealous. If I wasn't trying to get other things taken care of I would try and buy them for my upcoming project S2. They will work fine, but you will have to either drill your front mount or buy a billet one like the NRHS one that bolts XB heads to tubers. The XBs have flat tops so IIRC the stock pistons will work fine.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Thursday, November 13, 2008 - 11:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

XB heads do not have the holes drilled and tapped for your carb mount.
Top of pagePrevious messageNext messageBottom of page Link to this message

Skntpig
Posted on Thursday, November 13, 2008 - 11:54 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

DOHH I have the NRHS mount for the stock heads, guess that won't work.

If I haave the holes drilled and tapped are the breather passages there?
Top of pagePrevious messageNext messageBottom of page Link to this message

Phelan
Posted on Friday, November 14, 2008 - 12:57 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

yes.
Top of pagePrevious messageNext messageBottom of page Link to this message

Puddlepirate
Posted on Friday, November 14, 2008 - 06:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Your rockers will work with those heads.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolt020283
Posted on Friday, November 14, 2008 - 08:56 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I was reading on the nrhs web site they do the breather hole tap for $50 on the xb heads they sell you should call them and see if they would do it for yours. Unless you have another place that will do it for you.
Top of pagePrevious messageNext messageBottom of page Link to this message

Skntpig
Posted on Friday, November 14, 2008 - 10:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The goofball sold one head! Guess I'm out on that deal.
Top of pagePrevious messageNext messageBottom of page Link to this message

Puddlepirate
Posted on Friday, November 14, 2008 - 03:22 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The sets pop up on Ebay every now and then. I paid about $325 for my set of '04+ XL 1200 heads, which are of course already drilled and tapped. I've heard of several people getting them for $200-$400 on ebay.

If you're in no rush, give it another week or two and another set will pop up, I'm sure.
Top of pagePrevious messageNext messageBottom of page Link to this message

Slc4me
Posted on Sunday, November 16, 2008 - 11:51 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

there is a set of xb heads on the ahdra swap meet right now 300 i think
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Sunday, November 16, 2008 - 01:07 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

"CORRECT" me if "i" am wrong, "BUT" the way it was told to me is 2007 on XLR1200 heads have the THUNDERSTORM ports and XB valves which equal XB9/XB12 heads ...
Top of pagePrevious messageNext messageBottom of page Link to this message

Phelan
Posted on Sunday, November 16, 2008 - 03:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

No. The XBs have better flowing port design and smaller ports, as well as no squish band and larger fins.
Top of pagePrevious messageNext messageBottom of page Link to this message

Slc4me
Posted on Sunday, November 16, 2008 - 04:02 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

so the xb heads are better than thunderstorm? and the xl are equivilant?
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Sunday, November 16, 2008 - 05:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Lets stay with the Ports and valves ...

The PORTS (IN. & EX.) are the same and by putting in the smaller valve STEM valves the ports flow better than the THUNDERSTORMS ...
Top of pagePrevious messageNext messageBottom of page Link to this message

Slc4me
Posted on Sunday, November 16, 2008 - 10:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

what about the 04+1200 XL?
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Monday, November 17, 2008 - 08:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

SPORTSTERS did not get BUELL Technology in the HEADS until 2007 ...
Top of pagePrevious messageNext messageBottom of page Link to this message

Slc4me
Posted on Monday, November 17, 2008 - 11:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

so 07 up sporty or any xb 12 is where i would look if i were trying to find a set of street heads that were affordable but better than the thunderstorm?
Top of pagePrevious messageNext messageBottom of page Link to this message

Puddlepirate
Posted on Monday, November 17, 2008 - 06:39 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Which Buell "technology" are you talking about?

From NHRS:
"03-PRESENT BUELL XB HEADS: This head is characterized by it's pear-shaped 62cc bathtub chamber and large 1.810 intake/1.575 exhaust valves. 7mm valve stems (versus 5/16 on prior heads) and small beehive springs were introduced on these heads as well.

The 62cc chamber gives about a 10:1 compression ratio when used with flat top pistons. NRHS offers a forged domed piston for this chamber to raise this to 10.5:1. The bathtub shape with flat (0 degree) squish bands eliminates the core shift issues with the 15 degree cast squish bands of the Thunderstorm heads, and also the bathtub shape allows the chamber to be sized down to 62cc without excessive valve shrouding. Finally, the bathtub shape offers much more material for machining in 15 or 30 degree dome cuts and or chamber relief cuts, making this head an excellent candidate for effective chamber work. Angling the squish band in an accurrate, machined fashion, improves on a 0 degree setup by more directly aiming the fuel coming out of the squish band at the flame front, and also reducing the shelf the air must go around when entering or exiting the chamber.

Ports were improved over the Thunderstorm head by way of a more gradual, constant arc in the roof through the bowl area, as well as a raised floor at the inlet. Both of these things help reduce turbulence by reducing the length difference between the roof and the floor, thus making the velocities at both places closer to the same.

This head is 3.670" in height, which is .020 shorter than the prior XL and Buell heads. by itself, this is not enough to necessitate shorter pushrods. If the head is decked, and used with thin gaskets to optimize squish clearance, pushrod length can become an issue.

These heads are ideal for 883 to 1200 conversions as they're all silver in color, although we've been known to black powder coat them for 883R models. As mentioned earlier, the carb mounting/breather holes need to be drilled and tapped to use them on a Sportster (we provide this service for free for heads purchased from us). The head is only sold disassembled, but NRHS offers them fully assembled with high flow stainless valves for the same price that all of the individual pieces cost at the dealer.

04-PRESENT XL1200R/C HEADS: These heads are identical to the 03-up Buell XB heads, except that the carb mount/breather holes are already drilled and tapped, and the finish is black with polished fins. Also, the rear XB head has a provision for a head temp sensor, and this head does not, but this is normally not needed on a Sportster application."
Top of pagePrevious messageNext messageBottom of page Link to this message

Buellistic
Posted on Monday, November 17, 2008 - 06:53 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Puddlepirate:

"THANKS", as "i" needed that INFO of my BLAST head UP-DATE ...
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration