| Author | Message | ||
     Koz5150 |
Well after 15,000 it appears one of the front exhaust mount bolts has decide to jump ship (well at least half of it did). So I am looking for anyone in the Appleton WI area that has the JIMS tool or if someone is looking to sell one (that may no longer need one) contact me. Like most people with a family, I am on a budget, but I can make you a custom chrome timing cover in exchange, or I have a decent collection of M2 parts. THANKS!!! Thanks, Ken | ||
| Brinnutz |
Someone will help you out Koz, a fellow badweb'r helped me out and let me borrow his, so I'm sure it won't be a problem finding someone who can. During your downtime, you could always polish my bike for me. I won't charge you. | ||
| Koz5150 |
I went on the "Slimey Crud Run" earlier this month. 315 miles of 40 degrees and rain. My M2 has more dirt on it right now then my Yamaha XT600. I have plenty of polishing to do myself, but thanks for the "offer".... | ||
| Preybird1 |
I took mine to a good motorcycle machinist and he welded to the stud and removed it, On the bike no tear down. | ||
| Smoke |
send me your address to tim@arrowaviationco.com and i will try to send you mine to use when i get back to work on tuesday. tim | ||
| Brinnutz |
Tim comes through again! | ||
| Koz5150 |
Tim, Thanks!!! I am going to give it a week or two if to see if I can find one localy. If not, I will definately get in touch with you! My riding season is over for the Buell this year, northern WI is getting cold. I also have an enduro (Yamaha XT600) to ride till I can bust out the snowmobile. | ||
| Smoke |
sounds good. trackday tomorrow!! tim | ||
| Koz5150 |
I found one localy. Thanks again to Tim for the very cool offer though! |
