G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Preybird1 Posted on Friday, October 17, 2008 - 07:04 pm:        I installed some led turn signals, Without a high inrush flasher. Now i know they blink faster without it. But my question is will this ruin the original flasher. Should i get the other one, Because i like the faster blinking anyways. Here look at these puppies http://i68.photobucket.com/albums/i20/preybird1/le d2.jpg   Skntpig Posted on Friday, October 17, 2008 - 11:26 pm:        It will be fine with the stock flasher. They look very nice.   Preybird1 Posted on Saturday, October 18, 2008 - 10:55 am:        Thanks for the info E-bay 19.95 for all 4   Eshardball Posted on Sunday, October 19, 2008 - 08:22 am:        I couldn't get mine to blink without the special flasher. They worked when only the front were LED but when I changed the back ones, I had to replace the flasher. I tried putting a resistor in line to simulate the load that a lamp filiment would put on the flasher but it was not sucessful.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: