Author |
Message |
Mm128
| Posted on Saturday, October 04, 2008 - 12:14 pm: |
|
Ok... I am putting my brackets on for my s3t's bags.. I have the REAR SUPPORT BRACKET... but i need to know EXACTLY how it fits up.. Can someone show me a pic from the rear and under neath where its mounted up. Thanks Matt M. |
Jramsey
| Posted on Saturday, October 04, 2008 - 01:06 pm: |
|
The front of bracket mounts where the frame tubes "y" behind the oil tank. Should be a tab on each side where the tubes Y together with a nut welded to it. 2 bolts in front and under tail light assy. 1 bolt for the spreader/adjuster centered underneath the license tag. And obviously the back of the passenger peg mounts. Don't know how to post pics. on this forum, sorry. |
Mm128
| Posted on Saturday, October 04, 2008 - 01:42 pm: |
|
J, I got the big bracket on... but There is another bracket that has (2) small rubber end pieces on the end of each side... Its called a REAR SUPPORT BRACKET.... I have put it on... but just wanted to make sure that it was on the right way... IF anyone can post some pics of the rear support bracket that would be awesome. Matt |
5liter
| Posted on Saturday, October 04, 2008 - 03:12 pm: |
|
Hope you can see this.
|
Mm128
| Posted on Saturday, October 04, 2008 - 03:35 pm: |
|
5liter, Thats IT... THANKS!!! Just wanted to make sure mine was right. Thanks again, Matt. |
5liter
| Posted on Saturday, October 04, 2008 - 04:38 pm: |
|
Make sure you've got the bracket support for the turn signals behind the saddle bag support. Don't ask me how I found out about that.............. |
|