G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Old School Buell » Archive through September 20, 2008 » Ever used a push button starter? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Kyrocket
Posted on Sunday, September 14, 2008 - 08:12 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

One of these?




I'm doing some major renovation this winter and have always like the looks of these and with the problems our tuber key cylinders have with wiring I thought about putting in one of these. Has anyone ever used one? I'm thinking of putting a three way toggle under the seat (for off, park and ign.) and then one of these on the starter. I'd like some input on the pros and cons and if anyone has ever done it, not only on a Buell but anything else. I'd like to put a clock in the stock ign. location. Let me know. Thanks.
Top of pagePrevious messageNext messageBottom of page Link to this message

Spiderman
Posted on Sunday, September 14, 2008 - 09:54 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That is just a starter button, you will still need a way to turn on your bike, IE the switch and a run/kill switch.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jos51700
Posted on Sunday, September 14, 2008 - 11:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Buy a good one, not some Custom Chrome trash, or they'll let water into your solenoid. Not a good scene.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firebolt020283
Posted on Sunday, September 14, 2008 - 01:13 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

im confused i could swear i push a button to start my bike. and you can hardly see it as aposed to that big guady thing
Top of pagePrevious messageNext messageBottom of page Link to this message

Georgedombeck
Posted on Sunday, September 14, 2008 - 02:38 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

That big gaudy thing goes right on the starter.
Top of pagePrevious messageNext messageBottom of page Link to this message

Kyrocket
Posted on Sunday, September 14, 2008 - 03:30 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

You're right George, right on the starter itself. The wires going into the back of my cylinder are already brown and crispy and they get HOT (ask me how I know) very HOT. Think of it this way, put in a toggle where the cylinder is, a three way job, it'll work just like the key right? Off, park, ignition? Now move that toggle to somewhere of your choice off the dash. It'll work won't it? At least in my feeble brain it will. Spidy I plan on leaving the kill switch in the loop because I think it will be a lot easier to kill it there than to reach down and toggle it off. I was just looking to see if anyone had ever used one and how dependable they were. Like Grandpa says, it may not be enough salt for a nickel. I'm still trying to find one installed to give yous a better idea. I saw a Buell engine on the bay last week with one installed but didn't save a pic.
Top of pagePrevious messageNext messageBottom of page Link to this message

Jos51700
Posted on Sunday, September 14, 2008 - 06:29 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Look at the chopper crowd. They clean up the RH switches by going to manual solenoid (as shown), and killing the motor with the key switch.

Top of pagePrevious messageNext messageBottom of page Link to this message

Sloppy
Posted on Monday, September 15, 2008 - 12:05 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I ran something similar when my ignition switch failed on me. And guess what -- it's failing again so everyone should have one of these in their tool boxes by now so they'll be prepared when it happens to them!

I put a rocker switch in the hole where the ignition goes on and wired it as "ignition on or off" and then I ran another push button switch hidden underneath the dash as a "theft prevention" device that would allow the rocker switch to be energized.

I continued to use the starter button in the original location.

It would be unwise to but the starter button elsewhere because if you accidently stalled the engine or hit the "kill" switch you want to quickly be able to pull in the clutch and turn the engine back over without taking your hands off the bars...
Top of pagePrevious messageNext messageBottom of page Link to this message

Brettx1
Posted on Monday, September 15, 2008 - 11:56 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Check out the M-Lock from http://www.motogadget.com. I'm considering doing this when I install their mini gauge on my bike this winter, and I've been stumped as to where to mount the ignition switch. The M-Lock seems to solve that problem for me.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration