| Author | Message | ||
     Redefine420 |
So my brakes have been feeling a little spongy so I tried to bleed them to remedy the situation. Now I can't get any pressure to the front or rear. I've tried a couple different tricks I've found in the knowledge vault to no avail. I've decided I want to rebuild the front and rear master cylinders. Here is where I'm having a little trouble. My manuel says that new parts were introduced on the 98 models. It also says that the new rebuild kit will fit my 97 for the front master cylinder, but it does not say the same for the rear. Do I need to install a whole new rear master cylinder from a 98 or does the rebuild kit work with what I have? |
