G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Dave_02_1200 Posted on Tuesday, June 10, 2008 - 04:24 pm:        Does anyone know what kind of plastic the bodywork on a 2002 M2 is made of? I have a tail section with a crack that I want to fix but I don't know what would be the best way to do it. Advice and recommendations would be much appreciated. Thanks, Dave   Blackm2 Posted on Wednesday, June 11, 2008 - 01:44 am:        I had a crack on my tail section(no not that one!) under the seat. It was starting to really shake bad at idle, so I sanded down around the crack(again this is underseat), drilled a hole in the crack and then put ABS glue on it. It is the black glue used to fit black ABS pipes together, get it at Home Depot. Put some tape on the underside if you have to drill though, so the glue doesn't drip on anything else. So far so good.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: