Author |
Message |
Onahog
| Posted on Monday, June 09, 2008 - 08:58 pm: |
|
Rear Pads for your Gambler Caliper on an RS1200 are avaiable thru Behling Racing.. Contact Bill Behling...262-783-7474 Part # 870-15E-6083-1 Cost $22.18 pr. I just got mine and they are a perfect fit...Thx to Tom from EFB Design for the tip on Behling racing having them... My Rs is coming along great....Motor is just about done now and everything else pretty much cleaned up....Loooking Good! Hankb.. |
Rich
| Posted on Tuesday, June 10, 2008 - 11:37 am: |
|
Thanks for posting that, Hank. Got my new pistons in my RS, runs like crap, don't know why. If this keeps up, I'll be riding something else to Homecoming. |
Smoke
| Posted on Tuesday, June 10, 2008 - 08:01 pm: |
|
sorry to hear your's aint runnin right Rich. thanks for the #'s Hank. tim |
Onahog
| Posted on Tuesday, June 10, 2008 - 10:57 pm: |
|
Rich....Whats it doing?....Hankb |
Rich
| Posted on Wednesday, June 11, 2008 - 06:20 am: |
|
It's not firing evenly seems like the front cylinder is weak. I'm going to reset the pushrods(shaved heads)and see if that cures it. The Hall effect is kinda melted too, but if it fires at all, that should be good, no? |
Rich
| Posted on Wednesday, June 11, 2008 - 04:49 pm: |
|
I readjusted the pushrods, no change, so I replaced the timer plate, and it idles fine. Coincidence got me; I don't know why it decided to go bad right now. Damn thing was running fine, when I took it apart. |
Onahog
| Posted on Wednesday, June 11, 2008 - 06:52 pm: |
|
Rich...better now than later away from Home Yes?...Sensor plates seem to have a mind of thier own...Lol....Im just putting the motor back in today, or should I say Im mounting the frame on the engine...Hb |
Rich
| Posted on Wednesday, June 11, 2008 - 08:06 pm: |
|
True enough. It's never been hauled home yet, so I'm lucky. I'm going to Gunk it tomorrow, put the rest of the body back on, and burn some 93. |
|