| Author | Message | ||
     Buell2448 |
any of you ever heard of the injector controller FI2000 put out by cobra and if i can get one for my 99 X1 sounds like the ticket to me? | ||
| Bikerjim99 |
You may want to check out the ECMSpy program to adjust your fuel injection. | ||
| Beachbuell |
Stay away from the FI2000. Just my opinion on what I have seen! | ||
| Buell2448 |
ecm spy looks vary complicated like you could really mess up stuff this is plug and play and if it does not work at least you can un plug it and go and i have not got a good awnser for how much ecm spy cost? beachbuell have you had a bad luck with the fi2000? | ||
| Jos51700 |
FI2000 is a joke. It adds fuel, but isn't smart enough to add it at the right time, load, etc. Once it's set for a given temp, RPM, TP setting, it will ONLY be accurate at those values again, and the further any one of those three values gets from where FI2000 was set, the more "off" it is. In the '80's, when something was "2000" it was futuristic. It's now 2008. That should tell you something about Fi2000. | ||
| Jos51700 |
"ecm spy looks vary complicated like you could really mess up stuff this is plug and play and if it does not work at least you can un plug it and go " This is true, however, and worth considering. ECM spy cable: $30 The rest of ECMSPY: $zero Certainly cheaper than FI2000, and you can go "home" with ECMSPY. Just save your stock maps first. | ||
| Buell2448 |
ok were did you get the ecm spy for $zero? | ||
| Jos51700 |
www.ecmspy.com  | ||
| Jos51700 |
Yes, I know, too good to be true, but it's 4 reals. | ||
| Buell2448 |
k went there do i down load one of the downloads to my lap top? | ||
| Oldog |
down load the program get the cable [ buy the usb end build the other ] down load the driver install the software and driver READ THE MANUAL ON ECM SPY the software is a nicely done program ( tool ) connect and enjoy, | ||
| Beachbuell |
""beachbuell have you had a bad luck with the fi2000?"" I've un-installed more than I care to remember. That module tricks your computer and does not jive well with the HD electrical components/system. It usually does more harm than good. I've seen them take out the ECM's that they piggyback off of. Talk about throwing $$ out the window. Now you are buying the correct tuning system AND a new ECM! (Message edited by beachbuell on May 20, 2008) | ||
| Buell2448 |
believe it or not that is what the tech person said at fi2000 also thanks hopefully i will be doing the ecm spy soon with a little help from you all seth | ||
| Beachbuell |
 | ||
| Seth2448 |
getting all the pieces together will have the ecm spy up and running soon thanks yall | ||
| Seth2448 |
ecm spy up and running works great thanks for the help if anybody else needs help let me know  | ||
| Jos51700 |
You changed your username? | ||
| Buell2448 |
not sure how that happened? |
