G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Numb_nutz Posted on Monday, March 10, 2008 - 09:42 pm:        Has anyone used a stock buell single fire coil with a Hi4 or Dyna 2000 ignition? I switched my 1999 S3 to a carb and have been running the stock ignition but it's seems like it's not quite right. The stock coil is sort of compact and fits well. I don't no if the aftermarket has one that is the same size.   Bad_karma Posted on Tuesday, March 11, 2008 - 02:27 am:        Kevin When I switched to a Carb I used the crane coil with the Hi-4 ignition. I'm very pleased with it. Joe   Natexlh1000 Posted on Tuesday, March 11, 2008 - 05:29 am:        Check to see what the recommended primary resistance is for those ignition systems. Our coils have a crazy low resistance like under an ohm. For comparison, points-style coils generally run 5 ohms. If you attempted to run a stock Buell coil with points, the points would most likely burn.   Numb_nutz Posted on Tuesday, March 11, 2008 - 07:35 am:        Thanks Joe, I was a little worried about clearance. It doesn't look like theres much room under there. I'll have the tank off today, that should give me a better look.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: