Author |
Message |
Werewulf
| Posted on Wednesday, February 13, 2008 - 05:18 pm: |
|
will the arlen ness "big sucker" for sportsters fit a tuber? |
Warlizard
| Posted on Wednesday, February 13, 2008 - 05:54 pm: |
|
Just guessing here, but I believe it will fit the carbed tubers. I imagine it would fit the FI's w/ some mods for the temp sensor. |
Oldskoolef
| Posted on Wednesday, February 13, 2008 - 06:32 pm: |
|
It will fit with just a bit of trimming to clear the frame tubing. If you don't trim it in 2 places, the backing plate will contact the frame. It took about 10 minutes to fit to the bike with a cutting wheel and a file. I have one on my 97 M2. |
Cuelbuell
| Posted on Thursday, February 14, 2008 - 07:26 am: |
|
can you post pictures of it installed, and possibly pictures of where you cut? |
Werewulf
| Posted on Thursday, February 14, 2008 - 09:44 am: |
|
i put a screamin eagle AC on my 2000 m-2 and it fit perfectly... now i cant remember which year SE it was from... im thinking that any year that used a carb was the one... getting old is not for wimps.. |
Oldskoolef
| Posted on Thursday, February 14, 2008 - 04:40 pm: |
|
Here are the pics of the Big Sucker installed on my 97 M2. The black cover does not come with the kit.
|
|