G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Old School Buell » M2 Cyclone » Archive through June 05, 2008 » Braided oil lines « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemduece
Posted on Friday, January 04, 2008 - 01:52 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

who sells a full set with nice looking leak free conections i am going to cut my cam case so i will be able to show em off good, i plan to get a polished aluminum oil tank. I think it will look pretty custom.
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Friday, January 04, 2008 - 03:37 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Blake,
No one that I know of makes a kit for M2's.
The kit for the S1 was marginal at best. You're going to be better off assembling your own fittings and hoses. There is a line available that goes from the pump to the filter however, any Sportster accessory catalog should have them. I know Russell makes one.
The problems is with the tank fittings. They are fastend into the tanks and are hose barbs. The aluminimum tank (from American Sport Bike?) might have threaded bungs let you use standard AN fittings.

Brad
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemduece
Posted on Saturday, January 05, 2008 - 12:59 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

yeah i am waiting on the aluminum oil tank for a month or so it is so damn much money, hopefully they have threaded ports but who knows i may have to ask AL if i remember when i order a 26 tooth pulley this next week. thanks for the sportster tid bit, any projects going on in your buell lab?
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Saturday, January 05, 2008 - 10:50 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Yeah, way too many...
I need to pull the front head off my S2 to repair a bad exhaust valve seal.
I still need a crank for my M2.
I have fiberglass repairs on both my son's and my S2.
My neighbor has an old GL1100 I promised I'd help change a head gasket....
Another GL1100 needs a carb rebuild.

What all are you doing to the motor on your M2?

Brad
Top of pagePrevious messageNext messageBottom of page Link to this message

Djkaplan
Posted on Saturday, January 05, 2008 - 12:44 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I got complete set of Russell braided steel lines for the oil bag on my M2 from Al at American Sport Bike. It also included the oil pump feed line as well as the vent line that you'll uncover when you trim your cam case. You'll need to figure a way to sheath or route the braided lines so they won't scratch and eat their way through everything they rub against.
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemduece
Posted on Saturday, January 05, 2008 - 11:15 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

42 mikuni d&d system for now and a 1250 kit with ported xb heads to come sometime after prolly next winter, i dont like to perform mods to the bike in the summer i am to busy for down time. Once i have this years round of mods completed i want to get a good dyno tune can you name a shop in the metro area that can take care of me on that end of things?

(Message edited by cyclonemduece on January 05, 2008)
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Sunday, January 06, 2008 - 10:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

DJ, I'm not sure if they are available anymore.
Also one more thing to watch, make sure you keep ALL braded lines away from the starter leads.
Don't ask how I know....
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemduece
Posted on Monday, January 07, 2008 - 01:49 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

yeah i think that i would cover the outside of the stainless lines with a clear hose similar to the stock front brake line, Brad what did you do to your m2s crank? and HOW? i dont remember looking to close at your m2 what have you done on it? how did your neighbors molton s1 turn out? i got a lead on a local swingarm from a 1999 M2 if your interested for your s2 or his bike... blake
Top of pagePrevious messageNext messageBottom of page Link to this message

Road_thing
Posted on Monday, January 07, 2008 - 10:21 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

"keep ALL braded lines away from the starter leads"

Aw, come on, tell the story, Sparky!

rt
Top of pagePrevious messageNext messageBottom of page Link to this message

Bluzm2
Posted on Wednesday, January 09, 2008 - 12:25 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Umm, err,, Yup! There sure were sparks!! Real purdy blue ones and lots of them!
I had to pull the line off and put 2 layers shrink tube on it.. and reroute it..
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonemduece
Posted on Monday, January 14, 2008 - 12:22 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

so i am now going to add the xb oil cooler to my frame, look at the bike in here that does not appear to use an oil pressure sensor but instead has an oil cooler line, should i do this or take the other route, i would like to retain my sensor for oil pressure can i get a sandwich style adaptor?
Top of pagePrevious messageNext messageBottom of page Link to this message

Kmbuell
Posted on Monday, January 14, 2008 - 10:15 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Cyclone,
I'd use an adapter between the oil filter and the mount. Lots of them on eBay. also you might want to think about a thermostat or shut off valve for the cooler. My 40 plus years of MN living (before heading to NC) makes me think that you will need to turn it off in the spring and fall. Jagg makes a great one that you can get through Drag or others. XB's use a different oil system that seems to me will put more heat into the oil. XB's and Blasts have piston "squirters" to cool the pistons. The tubers don't have these. Good luck!
Top of pagePrevious messageNext messageBottom of page Link to this message

Loki
Posted on Friday, January 18, 2008 - 10:17 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Blake,

If you are going t5he route of the XB heads. I would take it one step further and drop the XB cyls on it also. The extra cooling fin area will negate any thought of using an oil cooler. The XB combination out in the air flow will shed a boat load of heat. So much so I pulled the oil cooler off my S1
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration