G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Crazydiamond Posted on Wednesday, October 03, 2007 - 06:28 pm:        My neighbor say he can sell me a new 190 Diablo cheap. Will it fit my '01 S3T with PM wheels with all the guards in place??   Sleez Posted on Wednesday, October 03, 2007 - 06:42 pm:        some say yes, some love it. i haven't tried it with all the stock guards so i can't say for sure, but my guess would be yes. if it is cheap enough, you should be ok. it can add some unwanted weight, but the avg rider will not notice it after getting used to it. my .02   Ducxl Posted on Wednesday, October 03, 2007 - 06:42 pm:        Sure will.I just did it to my '99 X1.The X1 is basically the same bike as the S3T.I did it in desperation.I needed new rubber and had a good Diablo 190 from my Ducati.Clears fine,but the belt IS close.Be sure and align your rear axle properly   Ducxl Posted on Wednesday, October 03, 2007 - 06:44 pm:        Oh yeah,the 170 or 180 will take the twisties better than the 190.I WILL go back to a 170 ASAP

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: