G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Warlizard Posted on Monday, October 01, 2007 - 10:18 am:        I have the updated Buell shifter. If I switch the block so the fulcrum is to the front of the bike w/ this make it 1 up & 4 down? I was thinking of positioning the block exactly opposite and using the adjustment linkage to position peg properly. Will it work?   Cyclonecharlie Posted on Monday, October 01, 2007 - 10:35 am:        Don't remember the make-up of your particular shifter,since I never had that one. But the lever that is attached to the shaft coming from the transmission, just rotate it 180 degrees and if it will adjust out you should have it. I've been running GP style shift for years and would never go back. Takes a couple of months to really get use to it and you need (if possible)convert everything you ride or you will have a hard time...........Charlie   Bad_karma Posted on Tuesday, October 02, 2007 - 01:17 am:        James I just updated my S1 & S3 with the new style shifters and that is exactly what I did. The shifter arm should face forward. Makes riding the twisties easier. Joe   Warlizard Posted on Tuesday, October 02, 2007 - 03:01 am:        Thanx Guys

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: