G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Whosbeenfartin Posted on Wednesday, September 12, 2007 - 04:35 pm:        Is the Buell Tuber 02 sensor a standard narrow band 02 sensor? Will a universal single wire 02 sensor work in place of it? I am getting a check engine light for the 02 sensor after about 10 minutes. ECM spy shows the voltage for the 02 sensor and it looks to be in the right voltage range. This would seem to indicate the the ECM is reading the 02 sensor, I'm thinking the sensor is just slow to react because its old and rusty. Thanks   Raceautobody Posted on Wednesday, September 12, 2007 - 05:34 pm:        Bosch 12014 Check out this site. A lot of good info for all things X1 http://www.saintjohn.nbcc.nb.ca/Marriott/x1/ Al (Message edited by raceautobody on September 12, 2007)   Natexlh1000 Posted on Wednesday, September 12, 2007 - 07:21 pm:        Make sure your headers are tight and that the sensor wire didn't rub through to metal somewhere. My X1 has done both of those on a few occasions.   Whosbeenfartin Posted on Wednesday, September 12, 2007 - 07:54 pm:        Thanks, And just for reference, you can infact use an unterminated "universal" sensor. But the 12014 is cheaper and comes with the proper plug.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: