G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Old School Buell » Archives OSB 001 » Archive through August 10, 2007 » 97 M2 sputter under 3k rpm « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Wake_brdr
Posted on Monday, July 23, 2007 - 01:43 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hey guys, I just bought a 97 m2 about 2 weeks ago. Under 3k rpm is sputters and take a while to get going, after it hits 3k it takes off. Is this normal?
Top of pagePrevious messageNext messageBottom of page Link to this message

Ratbuell
Posted on Monday, July 23, 2007 - 01:48 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Uh..in a word, no. It is not normal. Sounds like either a plug fouling, an intake leak, or a mis-jetted carburetor. Does it get better or worse if you ride with the choke partially out? Does it change with throttle position - i.e. sputters at light throttle but OK at WFO?
Top of pagePrevious messageNext messageBottom of page Link to this message

Chasespeed
Posted on Monday, July 23, 2007 - 02:23 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I would suggest the plug first myself....

ALSO, check the plug wires real good for any burn marks, or chaffing...

Sounds like a low RPM mis-fire, which is USUALLY, though, not always due to fouled plugs...

Next I would check the intake seals...

Chase

(Message edited by chasespeed on July 23, 2007)
Top of pagePrevious messageNext messageBottom of page Link to this message

Cyclonecharlie
Posted on Monday, July 30, 2007 - 09:37 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I would check the easy stuff first. Had the bike been sitting for awhile? My thoughts would be stopped up carb. Pull it and clean it, blow out the jets and passages, also write down what jets are there for future reference.Check setting on the fuel/air screw while you have it off(a lot easier than on the bike)2 1/2 turns as a rule of thumb. This is all easy stuff, get a couple of beers and have fun........Charlie
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration