| Author | Message | ||
     Rum_runner |
Looking for handle bars not as low as clip ons. But lower than stock. Does anybody know if Pro taper makes a bar that will work for me. Any ideas would be great. | ||
| Ceejay |
rum-your kinda limited as most low bars keeping a decent sweep,11 degrees or so will make contact with the manta tank, if you keep you're smaller tank, you're options get a lot better...I have some GP bent bars and they fit but barely. | ||
| Aceboy74 |
I have ProTaper Yamaha Mini's on my M2. They don't hit the tank, but I did slightly modify the flyscreen. It wasn't required, but it was being flexed out by the brake fluid resevoir. See my profile... | ||
| Rum_runner |
What handle bars does everybody has and how do they differ from stock. | ||
| Paint_shaker |
I have crossroads bars on an S1W. The ride position is not too agressive and promotes a little more confidence then the up-right postion of the stock bars. | ||
| Littlebuggles |
Using Crossroads S1w bars also. I have a stock bar I took off, I also have Clubman bars that have a lower angle than stock. Have not ridden with the clubman bars yet. Crossroads bars are just a little low for me. |
