| Author | Message | ||
     Jreichner |
I have a question. I have finally completed converting my S3T back to stock. Let ms tell you the re-engineered front exhaust bracket was a PIA because it repositions everything. It was difficult because I have a Works Performance shock and I had to find another way to route the remote res. Anyway, I am getting off the subject. While completing this work I noticed that two cables coming from the throttle side were cracked. This I believe is the shielding. My first questions is what are these cables? Throttle? Front brake? Clutch cable seems to be ok but my second question is does anyone have any suggestions for replacement? OEM or aftermarket? I am also wondering if I should just do all of the cables if these two have cracked. Your thoughts are highly appreciated. | ||
| Bomber |
J -- they come from the throttle siode of what? and go to where? stcok cables are fine, but Barnett make replacements as well, if you can't get stockers from some reason | ||
| Jreichner |
They do come from the throttle side. 2 cables total but I did not fully trace them yesterday and therefore I cannot tell you where they are going. I would have to look at that later tonight. Thanks for the information on the Barnett replacements. |
