Author |
Message |
Cyclonemduece
| Posted on Tuesday, September 05, 2006 - 12:52 am: |
|
my 00 m2 has the thunderstorm heads right? what are good cams for a swap in this bike, utilizing stock rockers,springs, retainers and push rods, also where can i get a bronze oil drive gear? any thing else besides the XB one piece rocker boxes that i should address while i am in there? |
Whodom
| Posted on Tuesday, September 05, 2006 - 06:23 am: |
|
You can get the bronze oil pump drive gear from any Buell dealer. I'm sure Daves can fix you right up. |
Chasespeed
| Posted on Tuesday, September 05, 2006 - 10:26 am: |
|
If you are looking for a drop-in cam upgrade, the X1 cams are I BELIEVE the biggest drop-ins... Move the rev-range up a tad..but, with the t-storm heads, and good tuning, you should be right aroung the X1/S3 101 hp(at the crank) ME, I would do the X1 cams(N4 are the equivilant I believe), XB boxes, ignition upgrade, Buell race header with whichever muffler you choose, D&D Full Exhaust, or a Force, with a high flowing airbox... there is a little more I would do, but it seems like you are on the right track for nice usable power.... Chase |
Cyclonemduece
| Posted on Tuesday, September 05, 2006 - 07:03 pm: |
|
well let me get what i got out in the open, i already am running the Vance and hines ss2r muffler with all of the packing out of it, and a forcewinder intake, and i have heard that i can do the andrews n4 cams which sound like a good choice for me. i am waiting a lil bit b 4 i do all me stuff i am going to do the xb boxes, but what is this ignition that you speak of? is it a plug and play deal (i dont like wireing) but can do the basics. and what are the upgraded gaskets that i should ask for at the HD counter? |
Chasespeed
| Posted on Wednesday, September 06, 2006 - 11:00 am: |
|
I am kinda partial to the Dyna 2000 systems for ignition, and its pretty much plug and play... AS far gaskets, I am not too sure, but I believe you just get the XB gaskets for the rocker boxes, and install... Put some packing in that SS2R...it will tear itself apart(shake actually).... I run the D&D, mainly becuase, it never needs to be repacked... If you can find a Buell Race header, the D&D will fit, OR you can use the Buell race can, a supertrapp, or build your own... Hope that helps a little.... Chase |
|