G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Crux Posted on Tuesday, May 16, 2006 - 06:34 am:        Here's the question: Will a D&D can off of the full system fit onto the race header?...or are the connections different. Thanks for the input, Jack   Shadowracerx1 Posted on Tuesday, May 16, 2006 - 08:39 am:        It should. The full system has an adapter between the muffler and the header pipes. remove the adapter and you have a fairly standard looking can.   Chasespeed Posted on Tuesday, May 16, 2006 - 02:14 pm:        WAIT!!!! The can Buell race header slip-on, I believe is much longer than the full systems muffler. IIRC, the standard slip-on, and the Race header slip-on are the same can.. IF that is the case, the that muffler will not work on the full sustem..the pipe will be in the tire... I can go out an measure the full ssytem can in you need... Chase   Crux Posted on Tuesday, May 16, 2006 - 03:59 pm:        There she is...or uh was, can't get this darn pic to post, it's the right size and everything......? Anyway, any input I'd appreciate it. Got this can at an awesome price, I'll sand and repaint, but I need to know how to mount her...the can that is. Currently I have the stock exhaust with the "Y" hanger, I know I'll need an elbow (If they make one that'll do the job) or a different header...any suggestions would be great. You guys are awesome, thx. (Message edited by Crux on May 16, 2006)   Crux Posted on Tuesday, May 16, 2006 - 04:19 pm:        Holy crap I figured it out. I initally thought the race header would work, however I think there would be an issue with the rear mount...the full D&D exhaust brings the can back a good deal more. Maybe this isn't a good idea. I'm betting finding a used D&D exhaust for one of these is going to prove difficult. Suggestions? (Message edited by Crux on May 16, 2006) (Message edited by Crux on May 16, 2006)   Prez Posted on Tuesday, May 16, 2006 - 05:28 pm:        uh oh..that makes me wonder something..when i bought my 2000 x1 the guy i bought it from said i had the race kit.. i know my ecm says for race use only on it.how do i tell if the header is a race one or not.. cuz i'm trying to buy a new header in the next few days..is a stock header compatible with the rest of the race kit??? or should i be looking for a "race header" only? thanx..prez   Chasespeed Posted on Wednesday, May 17, 2006 - 12:39 am:        There is one major difference between the stock and the race header... On the stock header, the collector is in fron tof the motor..then there is an elbow with a 90* bend that goes to the muffler.. The race header, the collector is under the motor(the 90* bend is part of the header, still 2 pipes). then it goes straight to the muffler.. Chase   Crux Posted on Wednesday, May 17, 2006 - 02:50 am:        Hijacker. This is my thread!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: