G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile


Buell Motorcycle Forum » Old School Buell » Archives OSB 001 » Archive through May 10, 2006 » Tranny toast? « Previous Next »

Author Message
Top of pagePrevious messageNext messageBottom of page Link to this message

Italialaw
Posted on Monday, May 01, 2006 - 08:57 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Hello all,
I posted this in the tranny section:

I was out riding this past weekend on my 1998 Thunderbolt. I was traveling at about 35mph in second gear and all of a sudden it felt like I was in neutral. I slowed down and dropped down into first and the same thing, like the bike was in neutral.

I pulled off into a driveway and again tried to move the bike starting from a stop position. The bike would not move and it made a grinding noise from underneath the crankcase cover. In fact, I could let the clutch all the way out in first gear and the bike acted as if it was in neutral. I could also physically roll the bike in any gear as if it was in neutral.

The bike has the HD "extended warranty" and I am hoping it will be covered (I believe transmission failure is covered). My question is: do the above symptoms indicate my tranny is shot? Also, is this a problem with tube frame Buells? I don't remember ever reading about a recall on the transmission. Thanks!
Top of pagePrevious messageNext messageBottom of page Link to this message

Natexlh1000
Posted on Monday, May 01, 2006 - 09:18 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sounds shot, sorry.
My ironhead did something simmilar.
I was going about 90-100 (because I'm dumb) and the fourth gear ate its shifter fork.

At least you have a trapdoor, eh?
Top of pagePrevious messageNext messageBottom of page Link to this message

Djkaplan
Posted on Tuesday, May 02, 2006 - 09:55 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

The most amazing thing about your story is that a 1998 Buell is still under some kind of warranty.
Top of pagePrevious messageNext messageBottom of page Link to this message

Italialaw
Posted on Tuesday, May 02, 2006 - 10:33 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I mis-typed. I have the "extended service plan." I bought the bike from a dealership 2.5 years ago and it had only 1800 miles. That's why I was offered the plan (what the dealer said). I'm glad I accepted that offer now.
Top of pagePrevious messageNext messageBottom of page Link to this message

Screamerbolt
Posted on Tuesday, May 02, 2006 - 09:35 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

will the bike still start when you hit the starter button?have you pulled the primary cover off yet?
Top of pagePrevious messageNext messageBottom of page Link to this message

Pressureangle
Posted on Tuesday, May 09, 2006 - 07:43 pm:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

Sorry for the late post.
Sounds like your front pulley got loose and stripped the splines. If you're lucky.
Top of pagePrevious messageNext messageBottom of page Link to this message

Firemanjim
Posted on Wednesday, May 10, 2006 - 03:03 am:   Edit Post Delete Post View Post/Check IP Print Post    Move Post (Custodian/Admin Only) Ban Poster IP (Custodian/Admin only)

I agree,some early Buells had problems with the front pulley,newer pulleys have a thicker spline area. My S-2 was very close to doing it when I discovered it doing other work.Nut had not come loose at all,BTW.
« Previous Next »

Add Your Message Here
Post:
Bold text Italics Underline Create a hyperlink Insert a clipart image

Username: Posting Information:
This is a private posting area. Only registered users and custodians may post messages here.
Password:
Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.)
Enable HTML code in message
Automatically activate URLs in message
Action:

Topics | Last Day | Tree View | Search | User List | Help/Instructions | Rules | Program Credits Administration