G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   M2buelligan Posted on Friday, March 17, 2006 - 08:25 am:        Hey guys, I have a catch can for the trans on my 99 Cyclone. The catch can I'm using is the American Sport bike model. It's not needed any more sense the crank seal has been replaced. I left it on just in case and because it looks so cool. I want to run the head breather tubes to this catch can. I would do this by connecting the head tube to the trans tube about three inches from the catch can. So the trans and heads would be venting to the same catch can. Would this set up allow adequate venting for the heads?

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: