| Author | Message | ||
     Loki |
whilst I patiently await a package from Court. I need some part numbers for... - choke/enricher cable - fork seals (WP Romas?) | ||
| Smoke |
when you receive court's package how about sharing any info. also let me know if you find a phone # for Buell Motor Co. blue 92rs owner | ||
| Buelliedan |
The choke cable is part number N0608.3 but good luck as it is a bicycle cable so you will probably have to go to a bike store for it as most HD dealers will not have it. If you can't get the cable at a bike shop then you might have to get ahold of Tom Anglin I believe at Buell. Court can get you in touch with him. If anybody has info abut the fork seals please post it as nobody it seems has been able to find these seals. Please don't say traxxion. They don't have them! (Message edited by buelliedan on September 22, 2005) | ||
| Buelliedan |
I have a phone number for Buell Motor Company: 414-363-3767 Somehow I don't think that will work though as they are based out of Mukwonago at the time of that number!  | ||
| Smoke |
thanks, dan tim | ||
| S2pengy |
Any idea if they are the same as the S2 forks??? | ||
| Loki |
Dan, At least it is a start. Kind of hard trying to figure out somethings without any books. I was wondering if a dash mounted cable for a dresser was the part or would work. and yes, I know Court is busy. 'pengy, I was wondering that same thing. These upside down versions appear to be the same as the those on the S2 | ||
| Loki |
Smoke, I don't mind being neighborly, neighbor. | ||
| Firemanjim |
If they are the same as an S-2,Aftershocks in Palo Alto redid my forks on my S-2.He does alot of KTM stuff also.Great guy and really knows his stuff. | ||
| S2pengy |
S2 WP Roma forks seal: Buell part number 45813-94Y On the seal it has PL 3-624 | ||
| Leftcoastal |
I put the S2 seals in my 91RS (I did it myself - it's a pain in the a$$!) they haven't re-commenced to leaking yet, though the bike's been parked for a while. BTW - my turbo has been repaired by the 'Turbo Doc' in Ogden, and is on it's way! WooHoo! | ||
| Loki |
'pengy and 'coastal, thanks for the info. The more I dive into this RS, the more I like. | ||
| Josh_ |
Talk to trackside engineering, they rebuilt my RS forks (and shock). I got a new choke cable from Dan@EFB (while TA was on his all-expenses-paid vacation to the desert) earlier this year. | ||
| Loki |
again with the questions.... okay the RS is running. Having taken off the extremely large SE Keihin butterfly and adopting a CV40 to replace it. Burning out the old decrepid fossil fuel. Once the bowl filled, the lady started right up. up and down the block. The right fork seal is toast and the left is following it. So off to order seals this week or call Trackside and ship them out. Now, after rolling the bike around......O-ring chains are good, just do not like sitting around and not being active. so... any ideas on a good replacement chain, size(630?) and length? | ||
| Josh_ |
106 link 530 chain. I used an X-Ring chain. | ||
| Loki |
Thank you | ||
| Rex |
give kim wagner a call at the buell motor company. she can help. she is a long time buell employee, and has access to older buell parts. she helped me with parts on my RSS. super lady....she can help. rex | ||
| Smoke |
hey Rex, what's kim's number? thanks, tim | ||
| Rex |
Call 262 642 2020, and ask for kim wegner...she is super! REX | ||
| Loki |
food for thought. rear master cylinder info; Brembo part number: 10.3006.20 rebuild kit: 110.2739.20 (10.3006.20) is obsolete and has a suggested replacement of: 10.4776.65 | ||
| Rex |
 |
