| Author | Message | ||
     Rr100041 |
will a post recall swingarm from a s2 or s1 or early s3 swingarm fit a rr-1000 without any modification or ride change besides the welding of the axel adjusting block tabs on the top and bottom . I had a problem with the sprocket bearing failing and letting the sprocket meet the swingarm (stop fast?!!! you don't want to know ) | ||
| Firemanjim |
Court,Josh,Dan,someone with older model experience chime in here!!! | ||
| Rr100041 |
i think those guys retired or something | ||
| Aaomy |
i cant really say,, but if you could post some good pictures of the current swing arm i may be able to help.. just a thought.. if you need measurements off a s2 stock steal swing arm i can give you those too.. hope some of this helps ,, aaomy | ||
| Buelliedan |
I honestly don't know as I only have the RSs not the RR. Aaron might be able to answer but he will not do it on this board unfortunately. | ||
| Firemanjim |
Eric,go over to Sacborg and ask.Aaron was just posting in the "Bonneville cancelled"thread.look here-- http://www.sacborg.com/ubb/ultimatebb.cgi?ubb=get_topic&f=1&t=013379 |
