G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Tbolt_pilot Posted on Wednesday, June 01, 2005 - 08:14 pm:        Angus and I are swapping our handlebars and I wanted to find out what to torque the handlebar clamp bolts to. I don't have a service manual so I have no idea. Thanks for any info.   Rammons Posted on Wednesday, June 01, 2005 - 09:06 pm:        Not sure which bike you want the specs for but for an '02 X1 the front bolts are 10-12 ft-lbs (14-16Nm) and the rear bolts the same. Manual says tighten the front first then the rear. Hope this helps. Bob   Ivershay Posted on Wednesday, June 01, 2005 - 10:08 pm:        and it might seem like they could stand a little more - be careful not to overtighten!!

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: