G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Angushendrick Posted on Monday, May 30, 2005 - 08:24 am:        Has anyone done the XB Rocker Cover mod that José describes on the DC BRAG site on an X1? I'm going to have my fuel tank off and I'd like to go ahead and do this, but I see that clearance was tight. Are the clearances different between an X1 and an S3? Thanks Angus   Chopperboy Posted on Monday, May 30, 2005 - 08:56 am:        Angus, I have performed the mod on my '02 S3 with no problems. As you described, the clearance between the PCV is close on the rear rocker box. I installed a couple of stainless washers under the tank rear mount before installing the bolt. Problem solved. Good luck. Todd   Bluelightning Posted on Monday, May 30, 2005 - 10:35 pm:        I also did the mod under the careful eye of Jose. I did a little creative filing on the PCV valve and was able to fit it with no problem. You just need to play around with the location of the tubing and how it sits under your tank.   Tripp Posted on Tuesday, May 31, 2005 - 05:37 pm:        this fella did it on an x1 and said he had no clearance issues http://www.badweatherbikers.com/buell/messages/3842/34533.html?1117574025   Angushendrick Posted on Tuesday, May 31, 2005 - 06:48 pm:        Thanks Tripp. Angus

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: