Author |
Message |
Cincymachine
| Posted on Wednesday, September 07, 2016 - 09:39 am: |
|
I have thrown a check engine like on my 08 xt. Looking for someone in the Cincinnati area with the espy and software to help me out. Aaron |
Natexlh1000
| Posted on Wednesday, September 07, 2016 - 11:21 am: |
|
You can read the error codes by shorting two pins. Lemme find the copy/paste list.... Here is the shorting routine for all fuel injected bikes: http://www.bcrider.com/DDFI.html Here is the list of 2008 and up codes: 11 Throttle Position Sensor 13 Oxygen Sensor 14 Engine Temperature Sensor 15 Intake Air Temperature Sensor 16 Battery Voltage 21 Interactive Muffler Control (XB12 only) 23 Front Fuel Injector 24 Front Ignition Coil 25 Rear Ignition Coil 32 Rear Fuel Injector 33 Fuel Pump 35 Tachometer 36 Cooling Fan 52,53,54,55 ECM failure 56 Cam Sync Failure |
Reepicheep
| Posted on Wednesday, September 07, 2016 - 11:22 am: |
|
I can help you. I'm in Lebanon, up by Kings Island, if that's not too far to go to get a scan. I have both the wired and wireless dongles (hey, they were cheap!). I haven't booted up my setup with my new to me 08 XT yet, so let me charge everything up tonight and make sure the old laptop and the old andriod tablet are all still on speaking terms with the dongles and that they will talk. The setup worked great with an 05 XB9SX and an 07 Uly. That being said, it is pretty easy to just pull a code with just a piece of wire and an eyeball. You can't test things by exercising them, or get at the deep data like temps and AFV settings, but you can get the trouble codes pretty easily. |
Greg_e
| Posted on Wednesday, September 07, 2016 - 11:39 am: |
|
Only the new version of ECMspy works on the 08 and up machines. |
Zac4mac
| Posted on Thursday, September 08, 2016 - 08:46 pm: |
|
ECMDroid works on the newer stuff. I've reset codes on my 09Uly, not much else tho. (Message edited by zac4mac on September 09, 2016) |
|