Author |
Message |
Jakeac44
| Posted on Sunday, January 24, 2016 - 05:41 pm: |
|
Hey everybody! I have a 2009 xb12x ulysses and im curious about compatibility with a x1 tail section, will the x1 section bolt right up on my uly? Thanks in advanced! |
Phelan
| Posted on Sunday, January 24, 2016 - 07:41 pm: |
|
Not even close to bolt-on. The only bolt-on option for a Ulysses is the XB Lightning Long (SS) tail section, since it uses the same side rails (except the SS rails have holes drilled and tapped for passenger peg loops, which you don't need if using the Uly rearsets). |
Jakeac44
| Posted on Sunday, January 24, 2016 - 08:15 pm: |
|
Thanks for the reply! So is there any smaller tail section that interchanges with my bike? |
Phelan
| Posted on Sunday, January 24, 2016 - 09:25 pm: |
|
The SS tail is several inches shorter still. I'm working on a Firebolt tail conversion on my Uly thing now, but it takes a bit of cut and weld to get the subframe to line up right. |
Jakeac44
| Posted on Sunday, January 24, 2016 - 09:53 pm: |
|
Okay thank you for the input! Ill keep researching |
86129squids
| Posted on Monday, January 25, 2016 - 01:02 am: |
|
You're wlecoem in advance for yourin advanced. There arr \Larger tailsedctions than may help 2oo, post up your results when done. |
86129squids
| Posted on Monday, January 25, 2016 - 01:03 am: |
|
Be precise and keep at it. |
86129squids
| Posted on Monday, January 25, 2016 - 01:04 am: |
|
Hey, ]]!! |
|