G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Jmccarthy Posted on Tuesday, May 13, 2014 - 04:39 pm:        Buell Blast 03 will start up, but the engine will die when the handlebars are turned to the right. This is the only thing that I have found loose on the bike, any suggestions as to what this is or where it's supposed to go? Loose Wiring Buell Wiring (34.8 k)   Natexlh1000 Posted on Tuesday, May 13, 2014 - 06:57 pm:        I'll need a better pic to guess better. My guess is that's supposed to go to the oil pressure sensor. does the oil light come on if the wire is shorted to ground?   Two_seasons Posted on Tuesday, May 13, 2014 - 10:09 pm:        You'll need to go into your wiring harness. As our bikes age, the insulation becomes brittle, and the wires are pulled apart within the insulation. More than likely, you'll find a wire(s) that has a separation in the copper within the insulation. Check your ignition wiring too.

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: