G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Pikeben08 Posted on Wednesday, April 09, 2014 - 10:31 pm:        I'm trying to build a bluetooth adapter for ECMDroid. I bought a cheap Kootek bluetooth slave from Amazon along with a Cp2102 UART Bridge. I'm using CoolTerm on my Mac. I can see that the CP2102 works when I link the rx and tx lines but when I try to send AT commands to the bluetooth module I get no response. Any ideas? Or do you know of a good forum I could take this question to?   Pikeben08 Posted on Tuesday, April 15, 2014 - 08:41 pm:        User error on my part with CoolTerm. HOLY CRAP!!! IT ACTUALLY WORKS!!! I can connect using ECMDroid!   Reepicheep Posted on Tuesday, April 15, 2014 - 08:49 pm:        Care to write it up? We would be interested.   Pikeben08 Posted on Tuesday, April 15, 2014 - 09:43 pm:        Will do.   Strokizator Posted on Tuesday, April 15, 2014 - 10:57 pm:        ¿Que? I'm thinking that even if I sit up on my roof, this is still going to go over my head. Interesting stuff nonetheless.   Pikeben08 Posted on Tuesday, April 15, 2014 - 11:12 pm:        It's actually pretty simple. My biggest problem was that I read that race ecms were supposed to communicate at a different speed than stock ecms, but turns out mine uses the same as stock. So maybe that was only later race ecms (my bike is an 02) for XBs and stuff? So if you have a stock ecm you don't really even need to configure anything since most serial bluetooth modules come with the correct baud rate by default. I'll try to post a step by step in the next week or so including configuration stuff for those that are interested. Ben   Reepicheep Posted on Wednesday, April 16, 2014 - 07:41 am:        Thanks Ben.   Pikeben08 Posted on Wednesday, April 16, 2014 - 02:19 pm:        Walkthrough posted: http://www.badweatherbikers.com/buell/messages/406 2/736624.html?1397672343

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a public posting area. Enter your username and password if you have an account. Otherwise, enter your full name as your username and leave the password blank. Your e-mail address is optional. Password: E-mail: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: