Author |
Message |
2008xb12scg
| Posted on Wednesday, June 20, 2012 - 04:51 pm: |
|
The ground wire to my blinkers came loose. My plan is to add a small length of wire to them as well as the other 2 wires going to the same ground. Does anybody know the size of the wire? |
Ratbuell
| Posted on Wednesday, June 20, 2012 - 05:30 pm: |
|
They're low enough current, you could probably use speaker wire. If I had to guess, I'd say 16 or 18 ga wire. Use stranded, not solid. |
2008xb12scg
| Posted on Wednesday, June 20, 2012 - 05:56 pm: |
|
Thanks! |
Mr_grumpy
| Posted on Thursday, June 21, 2012 - 11:59 am: |
|
Don't forget to change the fluid at the same time. |
Fahren
| Posted on Thursday, June 21, 2012 - 02:10 pm: |
|
Yeah, and don't let any magic blue smoke escape. |
Ltbuell
| Posted on Thursday, June 21, 2012 - 11:58 pm: |
|
...ah yes the blinker fluid......and lets not forget to lube those pesky muffler bearings.... |
Aesquire
| Posted on Saturday, June 23, 2012 - 07:07 pm: |
|
Only use synthetic fluid. It's important. |
|