| Author | Message | ||
     Xb9rderrick |
my buddy and i were riding the other day and when he got off his bike i noticed that both blinkers were blinking, its nothin important, just a little curious ha, we couldnt figure out how to get them on again | ||
| Doughnut |
What bike? | ||
| Spiderman |
The only Buells that have Hazards are the RR1000 and 1200, RS and RSS followed by the S2. Basically any Buell with Harley hand controls will have hazard lights... | ||
| Ratbuell |
If its a late model hd with security system, they double-flash when you turn the ignition off and the security system arms. Manually activate them by pushing/holding both turn signal buttons together, for 3 seconds. Repeat to turn them off. If it was a Buell...they don't (except the S2) have hazard lights. They bounce L-R-L-R if you trigger the BAS but that's it. | ||
| Ccryder |
On the 1125's if you trip the BAS (bank angle sensor) the turn signals flash just like 4-way flashers. Yeah I've done it twice at 0.0 mph. Later Neil S. | ||
| Froggy |
Not true, I can turn the hazards on my 1125's by kicking them over. | ||
| Spiderman |
lol ok, so ad 1125 to that list if you crash or kick over... | ||
| Doerman |
I've also seen very odd turn signal behavior on my 1125 if the switchgear is wet (after a wash. |
