Author |
Message |
Mm128
| Posted on Saturday, March 06, 2010 - 11:39 pm: |
|
Need the SIZE, length...thread pitch of the screws that hold in the STOCK tail light cover on a 02 X1.... There are (2) skinny long screws.... but I DONT seem to have them... Thanks Matt |
Americanmadexb
| Posted on Saturday, March 06, 2010 - 11:45 pm: |
|
PM Froggy! |
Froggy
| Posted on Sunday, March 07, 2010 - 02:38 am: |
|
He did, I don't have a tuber, but like Court I have parts books for bikes I never owned. Anyway page 78 of the 2002 X1 parts book shows the tail light assembly, but doesn't list the screws. It shows them as part of the tail light, so I can't even pull a part number to check the size. My guess is that the bolt is long and skinny with an SAE pitch. |
Littlebuggles
| Posted on Sunday, March 07, 2010 - 02:44 am: |
|
Matt, pm sent; I can help but am at work so it will have to be in the morning or afternoon when I get up depending on how the night goes. |
Littlebuggles
| Posted on Sunday, March 07, 2010 - 03:11 am: |
|
looks like you got the info you needed in the Old School section? |
Jramsey
| Posted on Sunday, March 07, 2010 - 03:13 am: |
|
Actually it's a Pan head sheet metal screw. 4MM x 32MM is what it measures. #8 x 1-1/4 is the closest inch/imperial size. |
Mr_grumpy
| Posted on Sunday, March 07, 2010 - 05:40 am: |
|
Gotta love tubers, mix & match. Basic rule of thumb (with exceptions of course). If it's on the motor itself or Frame it's imperial. If it's any outsourced part such as lights, switches, carb etc, it's metric. More or less anyway, it gives you a starting point in your search. You at least know which scrap bin to go delving in for that elusive fastener. |
Spiderman
| Posted on Sunday, March 07, 2010 - 07:48 am: |
|
Froggs, You have this tail light on your Blast! The funny thing about these screws is they are not listed in the hardware section of the parts book. The newest number I have for said screws is Y0401C.2 But the above description of pan head screws should work, it is almost like a wood screw and that is wat created threads in the plastic... |
Mm128
| Posted on Sunday, March 07, 2010 - 09:19 am: |
|
Thanks GUYS!!!! I am heading to the hardware store this morning.. The tail light was the ONLY thing holding me up... go figure two tiny screws for a cover would be the ONLY thing... ohh well easy fix I guess. Thanks again for ALL the help. Matt. |
Froggy
| Posted on Sunday, March 07, 2010 - 09:20 am: |
|
My Blast parts book has a different number for the tail light, 68108-96Y for the X1, Y0401.D for Blast. |
Littlebuggles
| Posted on Sunday, March 07, 2010 - 10:06 am: |
|
How old is your Blast book compared to the X1 book Froggy? Maybe the X1 pn is the old number and the Blast has the new pn? Glad you've got what you need Matt, nothing left to do but the horn huh? |
Froggy
| Posted on Sunday, March 07, 2010 - 10:21 am: |
|
My X1 book is 02, my Blast books are 03 and 05. Both Blast books have the same number. |
|