| Author | Message | ||
     Wolfridgerider |
Where does this thing plug into? The ECM? Resistor Plug (for active intake solenoid) • Use to cap off wires when throttle solenoid is removed. Eliminates dash warning. Y0248.1AM $6.02 | ||
| Barker |
When you unplug the solenoid, the remaining open connector (where the solenoid was plugged) is where you plug in the resistor. | ||
| Rockstarblast1 |
it goes into socket/ plug thing... lol its right there under the seat. the intake solenoid has a wire comming out of it then there is a wire harness/plug then more wires that go i dont have a clue where. the resistor is the male end i believe the other is the female. if i can find it i have pics when i removed mine | ||
| Froggy |
I should ban you for not using the search and checking the 1125R FAQ http://www.badweatherbikers.com/buell/messages/290 431/490767.html | ||
| Wolfridgerider |
so..... are you saying its for the 1125 only? | ||
| Froggy |
Unless you added an intake restriction solenoid to a XB, yes. | ||
| Rockstarblast1 |
im so lost where ur goin with this mark, lol am i missing something? | ||
| Spiderman |
Bring on the BAN HAMMA Frogggy!!!!  | ||
| Etennuly |
Mark, you been hitting the flea market for Buell items again?  | ||
| Wolfridgerider |
I honestly thought it was for a xb.... I was looking at the P&A catalog and there it sits... on page 38... right in the middle of a bunch of xb parts.... read it real quick and thought it was for the exhaust servo.... |
