G oog le BadWeB | Login/out | Topics | Search | Custodians | Register | Edit Profile Ads by Motorcycle.comMotorcycle InsuranceMotorcycle PartsMotorcycle Helmets Motorcycle Tires Buell Motorcycles

Author Message   Mfell2112 Posted on Saturday, December 30, 2006 - 07:50 pm:        I just won a compleat dash for my Cyclone. I think I will just leave the speedo and tach intact remove my existing speedo\dash and just bolt the new dash on to my bike. Since all the plugs are there and wiring has been done will this just be a plug and play installation? Regards Mike   Phat_j Posted on Saturday, December 30, 2006 - 10:22 pm:        your absolutly right, plug and play...   Jackbequick Posted on Sunday, December 31, 2006 - 03:28 pm:        Save these images and print them on letter sized paper and you'll have the install instructions for the Buell M2 tach kit: http://users.adelphia.net/~jackerbes/Buell/tach_1. jpg http://users.adelphia.net/~jackerbes/Buell/tach_2. jpg http://users.adelphia.net/~jackerbes/Buell/tach_3. jpg http://users.adelphia.net/~jackerbes/Buell/tach_4. jpg http://users.adelphia.net/~jackerbes/Buell/tach_5. jpg http://users.adelphia.net/~jackerbes/Buell/tach_6. jpg Jack   Mfell2112 Posted on Monday, January 01, 2007 - 04:49 pm:        Thank you very much guys. Regards Mike

Add Your Message Here Post: -Color- Black Red Green Blue Yellow Purple Orange Cyan Gray White -Font- Arial Courier Symbol Times Verdana -Size- Smallest (-2) Small (-1) Normal Large (+1) Largest (+2) Username: Posting Information: This is a private posting area. Only registered users and custodians may post messages here. Password: Options: Post as "Anonymous" (Valid reason required. Abusers will be exposed. If unsure, ask.) Enable HTML code in message Automatically activate URLs in message Action: